Polished concrete flooring in Poinciana FL - your slab, polished into the finished floor
Tired of covering a bare slab with tile or carpet? We grind and polish the concrete you already have into a finished floor at the shine you choose.
Is polished concrete right for your slab?A straight answer in Poinciana
Polished concrete flooring in Poinciana, FL starts with the slab your house already sits on. We grind or hone the concrete, harden it with a densifier, add a guard coat and polish it to the shine you pick, with dye if you want color, so the slab itself becomes your finished floor.
The price and the schedule mostly turn on what's on your slab and what shape it's in. Anything stuck to it has to come off first, and cracks or uneven spots need repair or extra grinding, so they add to both. The polish level you choose matters too, because a higher shine takes more passes.
Your slab decides how much stone will show, so we polish a sample spot on your own floor for you to approve. My quote names the polish level and the steps it takes to get there, so you can see what you're paying for and compare it line by line.
You can count on a straight answer about your slab, even when it's no, so call (863) 366-5021 and I'll come take a look.
Polished concrete finishes your slab can give
Your slab was mixed, placed and finished long before you call, and that decides which finish it can give. If it can't give the look you want, stained concrete flooring or terrazzo flooring may suit better.
Cream finish
We grind lightly so the fine cement paste on top stays, which gives a smooth, even floor with little or no stone showing through.
Salt and pepper
A slightly deeper cut opens the surface to fine sand and small specks of stone, so the floor reads as a soft speckle instead of a plain gray.
Full aggregate
We grind deeper until the coarse stone in your mix shows. Stone varies from one area's concrete to the next, so your floor may look different from one you've seen elsewhere.
Why Poinciana homeowners call Landmark Epoxyabout their concrete floors
When you call, I'm the one who comes out to look at your floor and write the estimate, and I'm on the job with our crew doing the work.
Prep that isn't rushed
Grinding and repair are the parts nobody sees once the floor is done, and they decide how it holds up, so I give them the time they need.
A straight answer on fit
If your slab won't polish to the look you're after, I'll tell you, because I'd rather point you to another floor than sell you one your slab can't give.
Learned on a grinding crew
I left a desk job to learn this trade on a crew that ground and coated concrete floors, then started this business in Poinciana in 2021.
Licensed and insured
We're licensed and insured, and you're welcome to ask for proof before we start. Your satisfaction, guaranteed.
Your house left clean
I want your home left clean when we pack up, so cleanup is part of the job we plan for, not something squeezed in at the end.
A quote for your polished floorwritten after I see your slab
Tell us your address, the room and what's on the slab now, and photos of the floor and any coating help. We reply within 1 business day to set up a free quote on site, with no pressure to book.
How your floor gets donefrom first call to walkthrough
We keep it simple. You see the finish on your own concrete before you commit, and the quote spells out the prep and the polish level, so you know what each step is.
You call or send the form
Call (863) 366-5021 or use the form, and tell us which room it is and what covers the slab now. Photos help me get a sense of it before I come out.
I look at your slab
I come out, look at the concrete and ask how you use the space, then we polish the sample spot. We talk through the finishes that fit, and I write a quote that spells out the prep.
We check the permit side
Before we start, we check which county or city office handles your address and sort out any permit the job calls for, so that's settled before our crew shows up.
Our crew preps and polishes
We take off whatever is on the slab, repair and grind it, then densify, polish and seal it to the level written on your quote.
We walk the floor together
When it's done, I walk the floor with you so you can look it over closely and ask how to care for it before we leave.
Questions about polished concrete
Can you polish a concrete slab that has tile or paint on it?
Yes, in most cases, once the old layer comes off. Tile, paint, epoxy and tile adhesive all need removing, and damaged or uneven areas need extra grinding or repair, so plan for that prep in both the quote and the schedule.
What causes polished concrete to turn a different color than expected?
Grinding away the surface paste is the usual cause, because a gray cream finish can turn brown once that paste is gone, and color can shift from one finish level to the next. Trade guidance calls for a sample area on the actual slab for that reason, and it's why we polish one on your floor before you decide.
How do I take care of a polished concrete floor?
One Florida guide suggests damp mopping weekly with a pH-neutral cleaner and putting down a densifier or guard maintenance coat every 3 to 5 years in a home. There's no waxing, stripping or refinishing, so routine care stays light.
How much does polished concrete flooring cost in Poinciana?
The price comes from your slab, mostly what has to come off it, how much repair it needs and the polish level you choose. One Florida guide says a quote should name the polish level, grinding passes, densifier and any decorative extras, because polished concrete with no defined level is too vague to price, and ours names the level and each step.
Do I need a permit to polish my concrete floor in Poinciana?
That isn't settled for polishing, so we check with the office that handles your address before work starts. Osceola County requires permits for structural or regulated work that needs a licensed contractor, and its list of work with no permit names flooring and tile but not concrete polishing. Polk County requires a permit to alter or repair a building, and you can reach a plans examiner there with permit questions at (863) 534-6080. If the job calls for a permit, we take care of it.
Should my slab be tested for moisture before polishing?
It's worth doing on an older house, since one Florida guide recommends moisture vapor testing before polishing. Older Florida homes built on a slab poured right on the ground sometimes have moisture issues, so we'll talk about it when I look at your floor.
Polished concrete around Poinciana
We're based in Poinciana and polish floors in the cities around it, including the ones below, with the same careful slab prep on every job. Pick your city or call (863) 366-5021.
See polished concrete on your Poinciana slabbefore you choose a finish
We pick up seven days a week, 7 AM to 9 PM on weekdays and 6 AM to 9 PM on weekends, so call (863) 366-5021 or send the form and I'll come look at your slab and polish a sample spot.