Concrete Sealing in Poinciana FL - a slab that sheds water instead of soaking it up
Concrete soaking up every rain and wearing down at the surface? We seal it so water beads up and rolls off.

What concrete sealing doesfor your Poinciana driveway or patio


Bare concrete soaks up water, and with every Florida downpour that shows up as stains, a dull surface and wear you can see. A sealer coats the slab so water beads up and rolls off instead of soaking in. Some sealers also leave a thin layer on top that takes the wear so the concrete doesn't.
The first thing I ask is whether you want the concrete to look the way it does now or come up darker with some shine, because that picks the sealer. Then we plan the work for a time when the slab is dry and not yet hot. The sealer maker Brickform says morning is best, after the dew is gone, because sealing over dew traps moisture and turns the sealer milky.
The price comes down to the size of the slab, which sealer you pick and how much prep it needs, and an old coating that has to come off adds the most work. The schedule turns on the weather and the cure time after. My written quote spells out the prep, so you can see where the cost goes before you decide.
Count on a straight answer about which sealer suits your slab and a clean site when we leave, so give us a call.
Concrete sealing for the slabs around your home
We match the sealer and the prep to the concrete in front of us, because a plain driveway, an old coated patio and a stamped walk each need something different.
Penetrating sealer
It soaks into the concrete and leaves the color and texture looking about the same, so it suits a driveway or walk you already like the look of.
Film-forming sealer
It sits on top, darkens the color and can add some shine, and that layer takes the wear. Going from this back to a penetrating sealer later means stripping first.
Slabs with an old coating
Pressure washing usually won't lift an old coating and it soaks the slab, so we grind or blast the coating off and let the concrete dry before sealing.

Why homeowners pick Landmark Epoxy Flooringfor sealing in Poinciana
Working with us is plain and unhurried, because I'd rather explain what your slab needs and why than talk you into a sealer it doesn't suit.
The owner writes your quote
I come out to look at the concrete and write the estimate myself, and I'm on the job with our crew when we do the work.
In business since 2021
We've been in business since 2021, and before that I learned this trade on a crew that ground and coated concrete floors for a living.
Licensed and insured on every job
We're licensed and insured for the grinding, sealing and coating work we do, so the job at your house is covered while we're on it.
Straight talk when sealing won't help
If your slab is cracked, worn or uneven, a sealer won't hide it, so I'll point you to concrete resurfacing and overlays or self-leveling concrete instead.
Your satisfaction, guaranteed
We clean up after ourselves and leave your home tidy when we pack up, because a sealed slab shouldn't come with a mess for you to deal with.
Price your concrete sealing on sitefree and written by the owner
Tell us the slab's size in square feet, whether it has an old coating, and whether it's stamped or beside a pool. We reply within one business day to set up a free on-site quote, with no obligation to book.
From call to sealed slabon your Poinciana driveway or patio
I keep it simple by writing a quote that spells out the prep, so you know what we're doing to your slab and why before anyone starts work.
You call or send the form
You call (863) 366-5021 or send the form with the slab's size and what's on it now, and we get back to you to set a time to come out.
I look at the slab
I come out, look at the concrete and ask how you use it, then we settle on today's look or a darker finish and I write the quote.
We sort permits and timing
Before we start, we check which office handles your address and sort out any permit the job calls for, then pick a morning when the slab is dry.
Our crew preps and seals
Our crew cleans the slab, grinds off any old coating it has, and puts the sealer down before the concrete heats up, with me on the job alongside them.
We walk it together
I walk the sealed slab with you when it's done and go over how long to keep feet and cars off it while the sealer cures.
Questions about sealing concrete
Which concrete sealer keeps my driveway looking the same?
A penetrating sealer is the one to pick if you want your concrete to look about the way it does now, because it soaks in instead of sitting on top. A film-forming sealer darkens the color, can add sheen and leaves a layer that takes the wear. We talk through both at the estimate.
How much does concrete sealing cost per square foot in Poinciana FL?
Professional concrete sealing with labor and materials usually runs about $1.50 to $2.50 per square foot across the US. That's a national figure, not our price, and an old coating or a stamped slab that needs stripping adds prep. For a number on your own slab, we quote it on site.
How long does sealed concrete take before I can walk or drive on it?
Brickform recommends keeping foot traffic off for 24 hours and waiting 72 hours before heavy traffic like cars. That holds even when the sealer feels dry sooner in the heat, so plan on the slab being out of use for those days.
Which county handles permits for my Poinciana home?
Your county does, and Poinciana spans both Polk and Osceola counties, so your address decides which permit office you deal with. Polk County's permit list names decks, walkways and stairs, not sealing, and Osceola County asks for a permit before construction or changes to a building's electrical, gas, mechanical or plumbing systems. Neither settles whether sealing needs one, which is why we check with your county as part of planning the job.
What causes concrete sealer to turn white or milky?
Moisture trapped under the sealer while it dries is the usual cause, most often from sealing over morning dew, which is why we wait for that to clear. One maker's guide says the slab should stay at least 5°F above the dew point while the sealer goes on and cures, or condensation can turn it milky for good. Ask us how we check that on your job day.
How do I know if my stamped concrete needs stripping before sealing?
Drop a dime-sized bead of water on it, and it should soak in within five or 10 seconds. If it sits on top, that's a sign of a cure-and-seal product put on when the slab was poured, and the concrete needs stripping bare before it's sealed again.
Concrete sealing around Poinciana
We're based in Poinciana and seal driveways, patios and pool decks in the cities around it across Polk, Osceola and Orange counties. Pick your city below, or call if yours isn't listed.
Book your concrete sealing estimate in Poincianaand pick the right sealer first
Call (863) 366-5021 or send the form with your slab's size, and I'll come out, look at the concrete and write a quote for sealing it, so you know the prep and the cost before you decide.
