Top-Rated Flooring Contractor in Poinciana FL - Durable Floors Over Well-Prepped Concrete

Landmark Epoxy Flooring of Poinciana coats garage and home floors in Poinciana and the cities around it, including Kissimmee and Davenport. We also strip peeling old coatings so a new one can bond, and resurface worn pool decks.

Tan, black, and white flake epoxy flooring extends beneath a parked car, shown close to its large alloy wheel.
  • Licensed and insured.
  • Free quotes on site.
  • Replies within 1 business day.

Epoxy floors that start with prepfor Poinciana garages and homes

Glossy, speckled concrete garage floor reflects light from an open doorway.
Light-colored speckled garage floor meets dark block walls, with sunlight casting a broad diagonal shadow.

Landmark Epoxy Flooring of Poinciana is a flooring contractor in Poinciana, FL. I started it in 2021 after learning the trade on a crew that ground and coated concrete floors. We're best known for the prep under garage and home floor coatings.

Most of our calls come from homeowners in Poinciana and the cities around it, plus some shop and warehouse owners. Every job gets the same patient grinding and patching underneath, because the prep is what keeps a coating from lifting later.

  • Plain talk, no sales pitch
  • Help choosing the right floor
  • Coatings, polish, stain and overlays

Our flooring servicesfrom bare slab to finished floor

  • A hard, glossy coat bonded to ground concrete, for garages, laundry rooms and other floors that take daily wear.

  • Shop, warehouse and workroom owners get a heavier coating system built for carts, forklifts and spills, planned around your working hours.

  • This is what we're best known for. We grind the slab, fill the cracks and lay a flake coating that wipes clean.

  • A coating that cures faster than standard epoxy, which suits a garage you need back in use sooner.

  • If you want a floor that looks like swirled metal or poured stone, this is the finish, and no two come out alike.

  • Kitchens, food prep rooms and shop floors that see hot water, grease and harsh cleaners need a tougher system than plain epoxy.

  • We grind and polish the slab you already have to a sheen, with no coating on top to peel later.

  • Stain soaks into the concrete for warm, mottled color, and then a sealer goes on top to protect it.

  • Chips of glass or stone are set in a binder and ground smooth, for an entry, lobby or room that takes heavy foot traffic.

  • Below-grade slabs need a floor that handles damp, so we check the moisture first and pick a system to match.

  • This is the step under the floors we lay. Grinding opens the concrete so a coating can grip it instead of sitting on top.

  • A clear sealer for driveways, patios and bare floors slows down the stains and water soaking into the concrete.

  • When a slab is pitted or worn but solid underneath, a thin overlay gives it a new face without tearing it out.

  • Uneven floors get a pourable layer that spreads out flat, so they're ready for tile, vinyl, wood or a coating.

  • We repair cracked or faded pool decks and recoat them with a textured finish that's kinder to bare feet.

  • Old epoxy, paint, tile glue or carpet adhesive comes off first, because a new floor only holds as well as what's under it.

Most jobs use several of these, because the slab gets ground before any new floor goes on. Price and timing turn on its condition, its size and the finish you pick, and your on-site quote spells out yours.

Blue basketball court with white lines and gray epoxy flooring inside a large industrial gym.

How a floor job goesfrom your call to the walkthrough

We keep it simple. The quote is free and done at your place, and there's no pressure to book, so you can take your time deciding.

  1. Call or send the form

    Call (863) 366-5021 or fill out the form with your address and the floor you have in mind. We get back to you within one business day.

  2. I look at your slab

    I come out, look over the slab and ask how you use the space. Then we talk through the floors that fit it, and I write up your quote.

  3. Permits, then the work

    Before we start, we check which county or city office handles your address and take care of any permit the job calls for. Our crew then preps the concrete and lays the floor.

  4. We walk it together

    When the floor's done, I walk it with you, so you can look over the finish and ask about care before you start using it.

Get a floor quote in Poincianabefore you pick a coating

Call (863) 366-5021 or send the form, and I'll come look at your slab before you decide anything.

Why Poinciana hires usfor garage, home and shop floors

We've been in business since 2021, and how I got started explains why we take our time on prep and talk straight about what your floor needs.

  • The person quoting does the work

    I look at your floor and write the quote, and then I'm on the job with our crew, so what we talked about is what gets done.

  • Your slab checked before any sale

    We look at the concrete before we sell you a coating. If it can't hold the floor you want, I'll tell you and point you to one that suits it.

  • Quotes that list each prep step

    Your quote names the grinding, crack repair and other prep in plain words, so you can see what you're paying for and compare it fairly with other bids.

  • We know which county you're in

    Poinciana's villages are split between Osceola and Polk counties, and we know which is which, so your job goes through the office that handles your address.

  • Licensed and insured, proof on request

    We're licensed and insured, and I'll show you the paperwork when I come out to look at your floor, so you don't have to take my word for it.

  • Your home left clean

    We cover what needs covering, keep grinding dust down and clean up before we pack up, because it's your home we're working in.

Look through these examples of flake, metallic, polished and stained floors to get a feel for the finish you'd like in your own space.

Questions homeowners ask us

How much does an epoxy garage floor cost in Poinciana?

It depends on the garage's size, the shape the slab is in and the coating you choose, so I give you your number after I've seen the floor in person. Cracks, oil stains and old coatings that have to come off all add prep, and prep is where most of the price moves. Call (863) 366-5021 and I'll come take a look.

Does it cost more to fix cracks before coating a concrete floor?

Yes, filling cracks and pits adds time and material to the job. Skipping it usually means the cracks show through the new coating and it lets go there first, so I point out each repair your slab needs before you book.

How long does it take to coat a garage floor?

That depends on how much prep your slab needs and how long the coating has to cure before you walk or drive on it, so I give you the schedule with your quote. Stripping an old coating or filling a lot of cracks adds time, and a faster-curing coating can win some of it back.

What license should a flooring contractor in Florida have?

In Florida, a certified contractor license lets a contractor work anywhere in the state, while a registered license only covers the cities or counties where the holder has a certificate of competency. Anyone providing services in Osceola County also needs a local business tax receipt from the county tax collector. We're licensed and insured.

Do you grind concrete before putting down an epoxy coating?

Yes, we grind the slab first, because grinding opens up the surface so the coating can grip it instead of sitting on top. Coating over smooth or sealed concrete is a common reason floors peel where tires turn and park.

Do you guarantee your floor coating work?

Yes, our promise is "Your satisfaction, guaranteed." We keep it by giving the prep the time it needs, because that's the part that decides whether a coating stays put.

Is epoxy or polyaspartic better for a garage floor?

For most garages I lean toward polyaspartic, because it cures faster and holds its color better in sunlight than standard epoxy. Standard epoxy costs less and works well when the floor can stay out of use a little longer, and either one only lasts as long as the prep under it.

Do I need a permit for a new floor in Poinciana?

It depends on which county your home is in and what the job involves, so we confirm it with the office that handles your address. Villages 1, 2, 5 and 9 are in Osceola County, which lists replacing flooring and cosmetic interior work among jobs that don't need a permit, and Villages 3, 4, 6, 7 and 8 are in Polk County. If your job does call for a permit, we take care of it.

Serving Poinciana and nearby cities

We're based in Poinciana and work in the cities around it. Pick yours below, or contact us if you don't see it, because these aren't the only places we go.

Tell us about your Poinciana floorand I'll come take a look

Put your address, the space and the floor you have in mind in the form, and we'll get back to you within one business day. I'll come out to look and write a free quote, with no obligation to book.