Commercial & Industrial Epoxy Floor Coatings in Poinciana FL - a floor built for your work
Coating peeling, blistering or wearing through where carts and forklifts run? We prep the slab and match the resin to your chemicals, heat and traffic.
What goes into a commercial epoxy floorin Poinciana shops and warehouses
If the coating on your shop or warehouse floor is lifting, blistering or worn through, the slab under it usually needs as much attention as the new resin. At Landmark Epoxy Flooring of Poinciana, our commercial and industrial epoxy floor coatings start with grinding or shotblasting the concrete, then a resin coat that stands up to wear and chemicals.
When a resin floor fails, it almost always comes back to the concrete underneath or the wrong system, not the resin itself, so I don't rush the prep. The price moves with the floor's size, how much work the slab needs and which system fits, and the schedule turns mostly on how long you can shut the area down.
Somebody has to hand us a sound slab, and one coating maker's prep guide puts that on the owner or the concrete contractor unless the paperwork says otherwise. So we agree in writing who gets the slab ready before anything goes on the calendar, and the quote I write after seeing your floor spells out that prep.
You'll get a straight answer on whether your slab can take the floor you want, so call (863) 366-5021 and I'll come take a look.
Commercial epoxy systems we match to the job
We choose the resin by what your floor faces each day. If you're comparing coatings, see our polyaspartic floor coatings, and for a house, our garage floor coatings.
Epoxy for chemical areas
Epoxy stands up to chemicals and heavy wear, which suits most shops and plants. It's fairly rigid, so a cracked or moving slab calls for a flexible or hybrid epoxy.
Urethane for heat swings
Urethane flexes more than epoxy and takes sudden temperature changes better, so we look at it where hot washdowns or cold rooms hit the floor.
MMA for short shutdowns
MMA is an acrylic resin that cures quickly, so it's often the pick when you can only close the floor for a short stretch.
Why shops and warehouses call Landmark Epoxy Flooringin Poinciana and nearby cities
Working with us is quiet and plain. You'll hear what your slab needs and what it doesn't, and the floor goes down at the pace the prep calls for.
I write the quote myself
I come out to look at your floor and write the estimate myself, then I'm on the job with our crew while the work gets done.
Coating floors since 2021
I learned this trade on a crew that ground and coated concrete floors, then started this business in Poinciana in 2021, five years ago.
Licensed and insured on site
We're licensed and insured, and you're welcome to ask to see both before we put a day in your building on the calendar.
Told straight when it won't fit
I'd rather tell you a coating won't suit your slab than sell you one that lifts, so you hear the hard news at the estimate, not later.
Your satisfaction, guaranteed
That's the one promise we make on every floor, and we leave your space clean when we pack up so your people can get back to work.
Get your commercial floor quotewritten after I see the slab
Tell us about the chemicals, heat, traffic, cleaning and shutdown window your floor faces. We'll reply within one business day to set up a free on-site quote, with no pressure to book.
How a job runsfrom your call to the walkthrough
I handle the look, the quote and the final walk myself, and the quote spells out the prep, so you know what's happening to your slab and why.
You call or send the form
Call (863) 366-5021 or use the form and tell us what the floor goes through each day, and we'll set a time for me to come out.
I look and write the quote
I check the slab and ask about chemicals, heat, traffic and how long you can shut down, then we talk through the systems that fit and I write the quote.
Slab and permits sorted
We agree in writing who gets the slab ready, check which county or city office handles your address and take care of any permit the job calls for.
Our crew preps and coats
We grind or shotblast the concrete so the resin has something to grab, then put down the system we agreed on, with me on the floor.
We walk it together
When the floor's done, I walk it with you, show you how it's finished and answer anything you want to know before we leave.
Commercial floor questions
What is the best way to choose an epoxy floor system for a warehouse in Poinciana?
Pick it by what the floor goes through each day, the chemicals, temperature swings, traffic and impact, cleaning and how long you can close the area, since those decide which resin holds up. The systems above each answer a different mix of those, and I'll go through yours at the estimate.
How much does a commercial epoxy floor cost in Poinciana, FL?
It comes down to the size of the floor, how much work the slab needs before coating and which system fits your use, so I give you a figure after seeing it. Old coatings to remove, cracks, a wet slab or a short shutdown that calls for a faster-curing resin push it up, and a sound, dry slab keeps it down.
What causes an epoxy floor to blister or peel off concrete?
Too much moisture in the slab is one of the leading causes of blistering, peeling and bubbling in floor coatings. The coating maker sets the pass mark and there's no one number for every product, so plan on the slab being tested against the product we pick. Most specs call for an in-place humidity test or a calcium chloride test, while plastic sheets and handheld meters only screen.
How do I fix a concrete slab that fails a moisture test before epoxy?
The usual fixes are drying the building with HVAC and dehumidifiers and retesting, a moisture-tolerant epoxy primer, a vapor control coating, or fixing the leak or drainage that's feeding the water. Drying only works when the moisture is left over from the concrete mix, not when it's coming up from the ground, so we find the source before picking a fix.
Do I need a permit for an epoxy floor in a commercial building in Polk County?
The county's list doesn't settle it for floor coating, because Polk County names permits for commercial changes that affect exits or fire ratings, not coatings. Separate electrical, mechanical or plumbing permits can apply even without a building permit, and you can call the county's Bartow office at (863) 534-6080 and ask for a plans examiner. As the steps above say, we sort any permit before we start.
Will epoxy yellow in a sunny loading area or showroom?
Standard epoxy can yellow or chalk after long exposure to sunlight, so floors that catch daylight through bay doors or windows usually get a UV-resistant grade or a topcoat made for it. Tell me where the sun hits when I come out, and I'll build it into the system.
Commercial epoxy floors around Poinciana
We're based in Poinciana and coat shop, warehouse and garage floors in the cities around it, including Haines City and Kissimmee. Pick your city below or call (863) 366-5021.
Book a commercial epoxy floor estimate in Poincianawith the owner walking your slab
Settling the slab questions early, who readies it and whether it needs moisture work, helps keep your shutdown on track, so call (863) 366-5021 or send the form for a free quote on site.