Flooring Contractor in Davenport, FL - Garage and Home Floors Built on Careful Prep
Landmark Epoxy Flooring of Poinciana puts down epoxy, polyaspartic, polished and other concrete floors for garages, homes, shops and warehouses in Davenport, FL, and we grind and prep each slab before anything goes on it.
Concrete floors in Davenportbuilt on the slab underneath
In Davenport we mostly coat garage floors and redo concrete inside homes, with some shop and warehouse floors too. It's a short drive from our base in Poinciana, and we do the same work in Kissimmee and Haines City.
The price usually turns on the size of the floor, the shape your slab is in and how much grinding and patching it needs before the new surface goes down. The schedule turns on that prep and on any permit your address calls for, and the quote I write after seeing the floor spells out the prep.
Call (863) 366-5021 or send the form, and I'll come look at your floor and write you a free quote.
Floors we put down in Davenportfor homes, shops and warehouses
From garage coatings to polished concrete and pool decks, these are the floors we put down for Davenport homes, shops and warehouses.
- Epoxy Floor Coatings A tough, easy-to-clean coat for Davenport garages, laundry rooms and other concrete floors that take daily wear.
- Commercial & Industrial Epoxy Floor Coatings For shops and warehouses in and around Davenport, a coating picked for forklift traffic, spills and long workdays.
- Garage Floor Coatings Our most common Davenport call, and the one where careful grinding decides whether the coating stays bonded to the slab.
- Polyaspartic Floor Coatings A faster-curing option when you want your garage back in use sooner, and we'll tell you if it suits your slab.
- Metallic Epoxy Flooring A poured, swirled look for living rooms, game rooms and showrooms where the floor is meant to be noticed.
- Urethane Cement Flooring Built for kitchens, food prep areas and work bays that see hot water, heavy cleaning and constant use.
- Polished Concrete Flooring Bare concrete ground and polished for homes and shops that want a low-upkeep floor with no coating to wear through.
- Stained Concrete Flooring Color worked into the concrete itself, a good fit for open floor plans and patios with a sound slab.
- Terrazzo Flooring Chips of stone or glass set in a ground, polished surface for entries and larger rooms that want a finished look.
- Basement Flooring For below-grade and lower-level rooms, we check the slab first and tell you straight if a coating won't hold.
- Concrete Grinding & Surface Preparation The step under every floor we put down, opening up the concrete so the new surface has something to grip.
- Concrete Sealing A clear coat for driveways, walkways and pool areas when you like the concrete as it is and want it protected.
- Concrete Resurfacing & Overlays A new wearing layer over tired, stained or patched concrete when the slab underneath is still sound.
- Self-Leveling Concrete & Overlays Flattens uneven floors in older rooms and additions before tile, wood or a coating goes over them.
- Pool Deck Coatings & Resurfacing Recoating or resurfacing worn, rough pool decks so the area around your backyard pool is comfortable underfoot again.
- Concrete Floor Stripping & Removal Taking up old peeling coatings, glue or tile so your new floor starts on clean, bare concrete.
Why Davenport homeowners call usa crew that preps first
I come out to your house myself, and I'm on the job with our crew, so the person who quoted the work is the one watching it get done.
One person from quote to finish
I look at your floor and write the estimate myself, then I work alongside our crew, so you aren't explaining the job twice.
Prep we don't rush
Grinding and patching the slab is the part nobody sees, and it decides whether a floor holds, so we give it the time it needs.
A straight answer on fit
If your slab won't suit the floor you have in mind, I'll tell you, because I'd rather lose the job than sell you a floor that lifts.
Licensed, insured and here since 2021
We're licensed and insured, and we've been grinding and coating floors out of Poinciana since 2021. Your satisfaction, guaranteed.
Your house left clean
When we pack up, we clear out the dust, the tape and whatever we tore up, so you walk back into a clean house.
How a job runsfrom first call to final walk
You make one call, I come out and give you a free quote on site, and that quote spells out the prep, so you know what we'll do to your slab before we start.
Call or send the form
Call (863) 366-5021 or fill out the form with your address and what you want done, and we'll set a time for me to come out.
I look at the slab
I check the concrete, ask how you use the space and talk through the floors that fit, then I write a quote that spells out the prep.
Permits, prep and the floor
Before we start, we check which city or county office handles your address and sort out any permit the job calls for, then our crew preps the concrete and puts the floor down.
We walk it together
When the floor's done, I walk it with you so you can look it over and ask anything before we pack up.
Where your Davenport house sitsdecides who you ask about permits
In Davenport, a floor job starts with your address, so these are the things we sort out before the grinder comes in.
City limits or the county
A Davenport address can sit outside the city limits, and your property's Taxing District shows whether it's in the city or unincorporated Polk County.
Permits go by type of work
The city's Building Department permits each type of work separately, and floors aren't on its list, so we ask them about your job.
Smaller single-family jobs
The city's single-family permit exemption covers work under $7,500 on one undivided, unphased contract, but not electrical, plumbing, mechanical, gas or structural work.
Your free Davenport floor quotewritten after I see the slab
Send your address and what you want done with the floor, and we'll get back to you within one business day. I come out myself to look at the slab, and the quote is free with no pressure to book.
Working in Davenportfrom our base in Poinciana
We're based in Poinciana and work in the cities around it across Polk, Osceola and Orange counties, and Davenport is a regular stop for us. Most of what we do here is garage and home floors, with some shop and warehouse slabs, and every one gets the same careful prep.
Before you hire anyone for a job inside the city limits, it's fair to ask about their license. Florida certified contractor licenses work anywhere in the state, registered ones only where the contractor holds a local certificate, and the city has contractors file a current state license before they work there.
Your city not listed? Call us
Any other city with its own page is listed below, and if yours isn't, call (863) 366-5021, because these pages don't cover every city we work in.